Previous | 
Home
Section: Partnerships and Cooperations
European Initiatives
ARTEMIS Projects
CESAR
Participant : Robert de Simone.
Others partners: AIRBUS Operations GbmH (Germany), AIRBUS Operations SAS (France), ABB AS (Norway), ABB AB (Sweden), AbsInt Angewandte Informatik GmbH (Germany), ACCIONA Infraestructuras S.A. (Spain), Ansaldo STS S.p.A. (Italy), ASTRIUM SAS (France), AIRBUS Operations Limited (United Kingdom), Aristotle University of Thessaloniki (Greece), Commissariat à l´Energie Atomique et aux Energies Alternatives (France), CNRS (France), Centro Ricerche Fiat S.C.p.A. (Italy), Critical Software S.A. (Poland), Danieli Automation S.p.A. (Italy), Delphi France SAS (France), Deutsches Zentrum für Luft- und Raumfahrt e.V. (Germany), Dassault Systemes (France), EADS Deutschland GmbH (Germany), Fondacion Tecnalia Research & Innovation (Italy), ESTEREL Technologies SA (France), Fraunhofer Gesellschaft zur Förderung der Angewandten Forschung e.V. (Germany)
See also: http://www.cesarproject.eu/
Abstract: CESAR stands for Cost-efficient methods and processes for safety relevant embedded systems and is a European funded project from ARTEMIS JOINT UNDERTAKING (JU). The three transportation domains automotive, aerospace, and rail, as well as the automation domain share the need to develop ultra-reliable embedded systems to meet societal demands for increased mobility and ensuring safety in a highly competitive global market. To maintain the European leading edge position in the transportation as well as automation market, CESAR aims to boost cost efficiency of embedded systems development and safety and certification processes by an order of magnitude. CESAR pursuits a multi-domain approach integrating large enterprises, suppliers, SME's and vendors of cross sectoral domains and cooperating with leading research organizations and innovative SME's.
Upon completion, CESAR was awarded an ARTEMIS honorary mention for achievement.
PRESTO
Participants : Frédéric Mallet, Arda Goknil, Julien Deantoni, Marie-Agnès Peraldi Frati, Robert de Simone.
Others partners: TELETEL S.A. (Greece), THALES Communications (France), Rapita Systems Ltd. (United Kingdom), VTT (Finland), Softeam (France), THALES (Italy), MetaCase (Finland), Inria (France), University of LâAquila (Italy), MILTECH HELLAS S.A (Greece), PragmaDev (France), Prismtech (United Kingdom), Sarokal Solutions (Finland).
See also: http://www.cesarproject.eu/
Abstract: The PRESTO project aims at improving test-based embedded systems development and validation, while considering the constraints of industrial development processes. This project is based on the integration of test traces exploitation, along with platform models and design space exploration techniques. Such traces are obtained by execution of test patterns, during the software integration design phase, meant to validate system requirements. The expected result of the project is to establish functional and performance analysis and platform optimisation at early stage of the design development. The approach of PRESTO is to model the software/hardware allocation, by the use of modelling frameworks, such as the UML profile for model-driven development of Real Time and Embedded Systems (MARTE). The analysis tools, among them timing analysis including Worst Case Execution Time (WCET) analysis, scheduling analysis and possibly more abstract system-level timing analysis techniques will receive as inputs on the one hand information from the performance modelling of the HW/SW-platform, and on the other hand behavioural information of the software design from tests results of the integration test execution.
Collaborations in European Programs, except FP7
ITEA2 Timmo2Use
Participants : Marie-Agnès Peraldi Frati, Julien DeAntoni, Arda Goknil, Jean-Vivien Millo, Yves Sorel.
Project title: TIMing MOdel, TOols, algorithms, languages, methodology, and USE cases
Other partners: AbsInt Angewandte Informatik GmbH (Germany), Arcticus Systems AB (Sweden), Chalmers University of Technology (Sweden), Continental Automotive GmbH (Germany), Delphi France SAS (France), dSPACE GmbH (Germany), INCHRON GmbH (Germany), Institut National de Recherche en Informatique et Automatique (France), Mälardalen University (Sweden), Rapita Systems Ltd. (United Kingdom), RealTime-at-Work (France), Robert Bosch GmbH (Germany), Symtavision GmbH (Germany), Technische Universität Braunschweig (Germany), Time Critical Networks (Sweden), Universität Paderborn (Germany).
See also: http://timmo-2-use.org/
Abstract: TIMMO develops different types of timing constraints and dynamic behaviour formalisms, to be used inside the supply chain and the complex development process in distributed real-time automotive system design. TIMMO-2-USE stands for TIMing MOdel - TOols, algorithms, languages, methodology, and USE cases which summarizes the main objectives of the project, i.e., the development of novel tools, algorithms, languages, and a methodology validated by use cases.
The project provides partial funding for the postdoctoral positions of Jean-Vivien Millo and Arda Goknil.
ITEA2 OPENPROD
Participants : Simon Nivault, Yves Sorel.
Project title: Open Model-Driven Whole-Product Development and Simulation Environment
Other partners: Appedge (France), Bosch Rexroth AG (Sweden), CEA LIST (France), EADS Innovation Works (France), Electricité De France (France), Equa Simulation AB (Sweden), ETH Zürich (Switzerland), Fachhochschule Bielefeld (Germany), Fraunhofer FIRST (Germany), IFP (France), Inria Rocquencourt (France), INSA Lyon (France), Linköping University (Sweden), LMS Imagine (France), MathCore Engineering AB (Sweden), Metso Automation (France), Nokia (Finland), Plexim GmbH (Germany), Pöyry Forest Industry (Finland), PSA Peugeot Citroen (France), Siemens AG, Sector Energy (Germany), SKF Sverige AB (Sweden), Technische Universität Braunschweig (Germany), TLK Thermo GmbH (Germany), VTT Technical Research Centre (Finland), XRG Simulation GmbH (Germany).
See also: http://www.ida.liu.se/~pelab/OpenProd/
Abstract: The OPENPROD project is developing an open whole-product, model-driven systems development, modelling and simulation (M&S) environment that integrates the leading open industrial software development platform Eclipse with open-source modelling and simulation tools such as OpenModelica and industrial M&S tools and applications. The project will enable a more formalised validation of production to cut time to market and ensure higher quality, using open solutions which will have a high impact, based on easy uptake and wide dissemination.