EN FR
EN FR


Section: Research Program

From theory to experimentation and reciprocally

Nowadays, even if some powerful and efficient propositions arise in the literature for each of these networks, very few are validated by experimentations. And even when this is the case, no lesson is learnt from it to improve the algorithms. FUN research group needs to study the limits of current assumptions in realistic and mobile environments.

Solutions provided by the FUN research group will mainly be algorithmic. These solutions will first be studied theoretically, principally by using stochastic geometry (like in  [57] ) or self-stabilization  [59] tools in order to derive algorithm behavior in ideal environment. Theory is not an end in itself but only a tool to help in the characterization of the solution in the ideal world. For instance, stochastic geometry will allow quantifying changes in neighborhood or number of hops in a routing path. Self-stabilization will allow measuring stabilization times.

Those same solutions will then be confronted to realistic environments and their 'real' behavior will be analyzed and compared to the expected ones. Comparing theory, simulation and experimentation will allow will allow the influence of a realistic environment be better measured. From this and from the analysis of the information really available for nodes, FUN research group will investigate some means either to counterbalance these effects or to take advantage of them. New solutions provided by the FUN research group will take into consideration the vagaries of a realistic wireless environment and the node mobility. New protocols will take as inputs environmental data (as signal strength or node velocity/position, etc) and node characteristics (the node may have the ability to move in a controlled way) when available. FUN research group will thus adopt a cross-layered approach between hardware, physical environment, application requirements, self-organizing and routing techniques. For instance, FUN research group will study how the controlled node mobility can be exploited to enhance the network performance at lowest cost.

Solutions will follow the building process presented by Figure 2 . Propositions will be analyzed not only theoretically and by simulation but also by experimentation to observe the impact of the realistic medium on the behavior of the algorithms. These observations should lead to the derivation of cross-layered models. Experimentation feedbacks will be re-injected in solution design in order to propose algorithms that best fit the environment, and so on till getting satisfactory behavior in both small and large scale environments. All this should be done in such a way that the resulting propositions fit the hardware characteristics (low memory, CPU and energy capacity) and easy to deploy to allow their use by non experts. Since solutions should take into account application requirements as well as hardware characteristics and environment, solutions should be generic enough and then able to self-configure to adapt their environment settings.

In order to achieve this experimental environments, the FUN research group will maintain its strong activity on platform deployment such as SensLAB  [63] , FIT and Aspire  [53] . Next steps will be to experiment not only on testbeds but also on real use cases. These latter will be given through different collaborations.

Figure 2. Methodology applied in the FUN research group.
IMG/methodology.png

FUN research group will investigate self-organizing techniques for FUNs by providing cross-layered solutions that integrate in their design the adaptability to the realistic environment features. Every solution will be validated with regards to specific application requirements and in realistic environments.

Facing the medium instability. The behavior of wireless propagation is very depending of the surrounding environment (in-door vs outdoor, night vs day, etc) and is very instable. Many experiments in different environment settings should be conducted. Experiment platforms such as SensLAB, FIT, our wifiBot as robots and actuators and our RFID devices will be used offering ways to experiment easily and quickly in different environments but might not be sufficient to experiment every environment.

Adaptability and flexibility. Since from one application to another one, requirements and environments are different, solutions provided by FUN research group should be generic enough and self-adapt to their environment. Algorithm design and validation should also take into account the targeted applications brought for instance by our industrial partners like Etineo. All solution designs should keep in mind the devices constrained capacities. Solutions should consume low resources in terms of memory, processor and energy to provide better performances and scale. All should be self-adaptive.

FUN research group will try to take advantage of some observed features that could first be seen as drawbacks. For instance, the broadcast nature of wireless networks is first an inconvenient since the use of a link between two nodes inhibits every other communication in the same transmission area. But algorithms should exploit that feature to derive new behaviors and a node blocked by another transmission should overhear it to get more information and maybe to limit the overall information to store in the network or overhead communication.